Smoke20
Dec 13th 2007, 08:47 AM
Hopefully this is the right thread to be asking....
Ok, this is the 2nd salt tank I have done, the first was over 10years ago....
the tank is a 45tall (25x18x25)
My thoughts are this for filtration and what not
-Fluval 205 (already have)
-Pentair Aquatics (Lifeguard #FB300) Fluidized bed filter (rio 600 powered)
-Protein skimmer (unknown brand right now...)
-ebo jager heater
-2 Hydor Koralia #1 wave circ. pumps hooked to a wave maker
-Lighting will be 2 bulbs at ho, and 2 bulbs at vho. Like to add some lunar lights. The only issue I have is that Id like to have a single unit. Ive found a 4 bulb hood, that is hooked up for 2 ho, and 2 for vho(just need a ballast for vho)
As for the protein skimmer.....I originally thought the seaclone 100 would be a good choice, but after reading alot of different reviews, I struggle to think that was a good choice. 2nd choice is a Aquarium Systems PS, its used and reminds me of a seaclone.....but I came from using a Lee's counter current PS, so...these new skimmers a trick to me :P its really between the Aqua-C and a CPR Bak-Pak 2.
Ive seen some hang on the back ones called "Aqua-C Remora or Remora Pro" using a surface skimmer/bubble trap, and a Maxi-jet pump. Id like to find a hang on the back PS thats very reliable, and easy to use and set-up.
The lighting is also a big factor...as I plan to get a few soft corals(colt, mushroom, clam, and afew other easy to take care of ones to start with.) Id like to either make a case to hold a 4 or 6 bulb retro kit in VHO, as I have read 4-6 watts per gallon. Id like to see daylight bulbs, and attinics, or 50/50 in there as well. Im not sure if a MH bulb would cook the tank, as I dont want a chiller......would a MH bulb sitting on top of the aquarium raise the temp enough to cook stuff? Ive seen 150watt bulbs as the lowest so far
As you can see...I have aloy of questions....and hopefully some of you might be able to help. As for fish....
Im looking at a clown fish, hippo tang(dora from nemo :P ), prawls(or prawn) gobie, and a scooter blennie and a 8line wrasse. would a MH bulb sitting on top of the aquarium raise the temp enough to cook stuff? Ive seen 150watt bulbs as the lowest so far.....The tang is open to discussion to say, since Ive got to have the blennie, gobie, and the clown. other tank inhabitants(sp?) will be brittle stars, serpent stars, a long spined sea urchin, hermit crabs and some snail of different types.
. Down the line Id like to go with a much bigger tank...possibly a 90ish that will be housing a dwarf octopus.
The fluval was going to be used for chemicals....ie(carbon, those noodle things they send with the kit, and whatever else will help.)
As for a sump? I never gave it any thought. I did at one time want a wet/dry filter...Im hoping this is the same type of sump your refering to?
As for lights...Ive read, that 6watts is good lighting for each gallon of the aquarium. And with HO I havent seen a high enough wattage in hoods to attain that in a 2-4 bulb fixture. That was the only reason for going to vho. Even the power compats just dont put out that much wattage. Unless Im not seeing something in plain sight, how would this work out? the tank dimensions are 25longx18deepx25high. The tang is a open item, I like the look of them but its not needed :P
Deffiently going to have a few soft corals the choices I have looked at were:
Yellow Fiji Finger Leather, Flourescent Green Rasta Leather, Neon Green tree coral(leather), Colt Coral, Yellow tree Gorgonian, Red Sea Pink/white pumping Xenia, short tentacle plate coral.
As for all the fish I looked at:
Randall's Gobie, Golden head sleeper gobie, watchman bluespotted goby, scooter blennie, 8 line wrasse, starry lawnmower blenny.
Later on, Id like to get that blue hippo tang(dora-finding nemo?) and a Black tang. This of course will be in a 90 gallon I might do in a few years.....right after I get a house bought or built.
Any ideas and help you can throw my way would be greatly appreciated.
Thanks,
S
Ok, this is the 2nd salt tank I have done, the first was over 10years ago....
the tank is a 45tall (25x18x25)
My thoughts are this for filtration and what not
-Fluval 205 (already have)
-Pentair Aquatics (Lifeguard #FB300) Fluidized bed filter (rio 600 powered)
-Protein skimmer (unknown brand right now...)
-ebo jager heater
-2 Hydor Koralia #1 wave circ. pumps hooked to a wave maker
-Lighting will be 2 bulbs at ho, and 2 bulbs at vho. Like to add some lunar lights. The only issue I have is that Id like to have a single unit. Ive found a 4 bulb hood, that is hooked up for 2 ho, and 2 for vho(just need a ballast for vho)
As for the protein skimmer.....I originally thought the seaclone 100 would be a good choice, but after reading alot of different reviews, I struggle to think that was a good choice. 2nd choice is a Aquarium Systems PS, its used and reminds me of a seaclone.....but I came from using a Lee's counter current PS, so...these new skimmers a trick to me :P its really between the Aqua-C and a CPR Bak-Pak 2.
Ive seen some hang on the back ones called "Aqua-C Remora or Remora Pro" using a surface skimmer/bubble trap, and a Maxi-jet pump. Id like to find a hang on the back PS thats very reliable, and easy to use and set-up.
The lighting is also a big factor...as I plan to get a few soft corals(colt, mushroom, clam, and afew other easy to take care of ones to start with.) Id like to either make a case to hold a 4 or 6 bulb retro kit in VHO, as I have read 4-6 watts per gallon. Id like to see daylight bulbs, and attinics, or 50/50 in there as well. Im not sure if a MH bulb would cook the tank, as I dont want a chiller......would a MH bulb sitting on top of the aquarium raise the temp enough to cook stuff? Ive seen 150watt bulbs as the lowest so far
As you can see...I have aloy of questions....and hopefully some of you might be able to help. As for fish....
Im looking at a clown fish, hippo tang(dora from nemo :P ), prawls(or prawn) gobie, and a scooter blennie and a 8line wrasse. would a MH bulb sitting on top of the aquarium raise the temp enough to cook stuff? Ive seen 150watt bulbs as the lowest so far.....The tang is open to discussion to say, since Ive got to have the blennie, gobie, and the clown. other tank inhabitants(sp?) will be brittle stars, serpent stars, a long spined sea urchin, hermit crabs and some snail of different types.
. Down the line Id like to go with a much bigger tank...possibly a 90ish that will be housing a dwarf octopus.
The fluval was going to be used for chemicals....ie(carbon, those noodle things they send with the kit, and whatever else will help.)
As for a sump? I never gave it any thought. I did at one time want a wet/dry filter...Im hoping this is the same type of sump your refering to?
As for lights...Ive read, that 6watts is good lighting for each gallon of the aquarium. And with HO I havent seen a high enough wattage in hoods to attain that in a 2-4 bulb fixture. That was the only reason for going to vho. Even the power compats just dont put out that much wattage. Unless Im not seeing something in plain sight, how would this work out? the tank dimensions are 25longx18deepx25high. The tang is a open item, I like the look of them but its not needed :P
Deffiently going to have a few soft corals the choices I have looked at were:
Yellow Fiji Finger Leather, Flourescent Green Rasta Leather, Neon Green tree coral(leather), Colt Coral, Yellow tree Gorgonian, Red Sea Pink/white pumping Xenia, short tentacle plate coral.
As for all the fish I looked at:
Randall's Gobie, Golden head sleeper gobie, watchman bluespotted goby, scooter blennie, 8 line wrasse, starry lawnmower blenny.
Later on, Id like to get that blue hippo tang(dora-finding nemo?) and a Black tang. This of course will be in a 90 gallon I might do in a few years.....right after I get a house bought or built.
Any ideas and help you can throw my way would be greatly appreciated.
Thanks,
S